 |
|
 |
|
|
|
 |
 |
| |
To
answer the growing
demand for a product
to deliver the ultimate
in solar protection
and light control,
REFLEX™ has
developed the REFLEX™
ROLL range of cassette
roller blinds in two
sizes and a great
variety of options
to adapt to the demands
of both external solar
protection applications
and internal “blackout”
style audio visual
quality light control
applications. As with
most REFLEX™
products, the REFLEX™
ROLL cassettes allow
the joining of several
blinds to the one
motor, both in straight
lines or through angles
up to 45 degrees from
straight, thus decreasing
the perceived costs
associated with motorisation.
|
|
 |
| |
The
popular applications
for this system are
two fold. Firstly,
integration into building
facades for the ultimate
control of heat and
glare by protecting
the glass from the
outside against solar
extremes, together
with fully automatic
controls, will deliver
a complete solar control
system. The cassette
would ideally be installed
close to the glazing
and with the inclusion
of stainless steel
side guide wires,
and the incorporation
of sun, wind and timing
controls, this system
will exceed all expectations
for aesthetics and
solar control.
Secondly, the system
can be integrated
into the lighting
control system for
internal applications
such as meeting rooms,
theatres, laboratories
and other areas requiring
complete darkening.
|
|
|
 |
| |
The
most appealing feature
of the REFLEX™
ROLL system is the
range of options.
The REFLEX™
ROLL system has options
of three or four sided
roller coverage (when
the back of the roller
will be visible) and
a versatile, Nylon
plate mounting system
allowing face, top
or side fixing. The
incorporation of side
guiding systems utilising
either the 3.2 mm
stainless steel wire,
or one of the powder
coated, aluminium
side guide channels
- (40 x 40 mm for
external applications
or 40 x 25 mm light
sealing strips) may
be necessary.
Employment of the
stainless steel side
guide wires (attached
to the mounting plates
at the top and to
the substrate at the
lower extension point)
enables safe, external
fitting where wind
could otherwise prohibit
the use of normal
roller blinds and
the fitting of standard
awnings is not acceptable.
The side guide wires/channels
can also be employed
to allow blinds to
be installed in sloping
glass wall situations
with the addition
of extra weighted
hem rails.
The REFLEX™
ROLL system also includes
the RS8 & RS10
styles of skylight
blind, intended for
use in applications
calling for horizontal
operation where both
ends of the blind
have rollers within
cassettes, with the
inclusion of a spring
tension system in
the second housing,
to create a full tension
system for the fabric
element.
All covers are powder
coated or anodised
1.6mm aluminium and
the rollers are 60mm
(R8) & 80mm (R10)
and are all natural
anodised for strength
and durability.
All internal and external
components are completely
weather proof being
aluminium, nylon or
stainless steel.
The system can support
the many screen, solid
or sheer fabric elements
currently available
in the market remembering
that the skylight
series should only
use those fabrics
with a suitable mechanical
strength to withstand
the tension loads.
|
|
|
 |
 |
|
|
| |
|
|
|
|
|
