 |
|
 |
|
|
|
 |
 |
| |
To answer the growing demand for an independent drive system
to operate as a stand alone, automated power source for cable
pulling operation of shading systems with infinite shapes and sizes,
REFLEX™ Shading Systems has developed the UNIMOTOR™
UM8 and UM10 products.
|
|
 |
| |
The applications of the UNIMOTOR™ UM8 and UM10 drive
systems are almost endless – virtually anything that requires up to
50NM of “pulling power” can be operated by the employment of a
REFLEX™ UNIMOTOR™. Spring tensioned roller blinds in square,
rectangular or triangular shapes can be discretely extended and
retracted by wire or cords connected to the UNIMOTOR™. Light
fittings can be accessed and stage props can be easily and
effortlessly retracted using these power units. Lifting weights of
up to 50 kilograms over drops up to 6,000 mm are possible with
this compact and inexpensive system.
|
|
|
 |
| |
The selected electronic tubular motor shall be mounted within
a zinc plated, mild steel tube which shall rotate within a pair of
nylon, self lubricating, bearing plates within the treated aluminium
rail. This rail shall have a separate aluminium cover and end caps
attached on completion of installation with stainless steel cap
screws.
The pull wire shall be either 1.2 or 1.6 mm diameter stainless
steel, nylon coated wire or 1 mm polyester cord with a Kevlar core
if required. Colour of the polyester cord shall be beige, grey or
black. The pull cord/wire shall be attached to the motor tube by
infinitely adjustable slip rings that can be locked into position with
grub screws to retain the desired preset position.
The motor limits are fully adjustable and should be set after cord/
wire adjustment for the overall systems has been finalised.
The UNIMOTOR™ can have up to six separate cords/wires to drive
any combination of units with the same travel requirements within
the weight restrictions. The cord/wire exits can be from either end
plate of the system or can exit from one side of the unit.
The UNIMOTOR™ can be mounted in direct wire line or remotely
from the proposed driven product with intermediate and separately
supplied sheaves incorporated for the smooth redirection of the
cords/wires.
The mounting of the UNIMOTOR™ shall be through the base of
the main rail.
Suitable substructures include - timber, brickwork/concrete or
steel with the appropriate fixings.
Standard colour is white powder coat. Other powder coat colours
or anodised finishes are available on request.
UM8 = 80 mm x 80 mm x 900 mm long
UM10 = 100 mm x 100 mm x 1,000 mm long
|
|
|
 |
 |
|
|
| |
|
|
|
|
|
