 |
|
 |
|
|
|
 |
 |
| |
The
REFLEX™ CORD
LIFT series of motorised
headrails, originally
developed for the
automated operation
of the various brands
of pleated blinds
on the market, enables
very easy installation
and a great degree
of flexibilty. The
system has since been
developed further
to accommodate the
many styles of Roman,
Austrian and other
blinds that depend
on cords for their
lifting and lowering
operations.
|
|
 |
| |
This
product shall be used
in conjunction with
any of the variety
of pleated, honey
comb or soft window
furnishings that are
actioned by the raising
or lowering of cords.
For pleated blinds,
the selected blind
shall be attached
to the lower face
of the headrail using
the proprietory fixing
method. The lifting
cords then travel
into the headrail
and furl around the
internal, motorised
roller to provide
lifting motion. Should
one of the many soft
furnishing styles
be desired then that
soft furnishing shall
incorporate a 50mm
wide loop tape sewn
to the inside upper
hem to affix to the
hook tape on the front
of the headrail. The
soft furnishing shall
also incorporate the
standard rings afixed
to the battens or
tapes as usually fitted
for manual operation.
The system also has
components to cater
for applications such
as horizontal or inclined
areas with the inclusion
of two rails; the
first with a motor
and the second opposing
rail with an integral
spring tensioning
system.
|
|
|
 |
| |
The
preselected blind
is attached to the
53mmW x 51mmH aluminium
rail by either the
original
manufacturers brackets
(for pleated blinds)
or hook and loop tape
(for Romans and other
soft furnishings etc.)
with the lift cord
rings aligned with
the brass, cord exit
holes in the lower
rail face.
The cords shall be
1mm diameter polyester
in beige, grey or
black colour with
a Kevlar fibre core.
The cords shall terminate
within the rail onto
adjustable Acetal
rings.
The rail houses the
40mm aluminum motor
roller (which has
the drive motor within)
and the “evenlift”
cord system.
As the motor roller
turns, the roller
traverses laterally
to create an even
lifting effort on
all cords ensuring
the lower edge of
the blind lifts evenly.
Travel limits shall
be externally adjustable.
The rail shall be
powder coated or anodised
to suit.
The mounting method
is normally top fixed
but powder coated,
steel brackets are
available for face/side
fixing where necessary.
Configurations include
the single headrail
up to 3600mm wide,
straight line “tandem”
rails where two or
more rails can be
run from one motor
and the popular angled
version where two
or more rails can
drive around corners
up to 45 degrees sharing
a single motor. Maximum
lifted weight shall
not exceed 20kgs in
a straight line.
Skylights and glazed
roofs can also be
covered with the double
ended version with
a spring tensioning
rail placed at the
opposite end to the
motor rail, replacing
gravitational force.
These products
are available as components
to licensed fabricators.
Please contact us
for more information.
|
|
|
 |
 |
|
|
| |
|
|
|
|
|
