 |
|
 |
|
|
|
 |
 |
| |
To
answer the growing
demand for a product
to deliver the ultimate
in light control,
privacy and solar
protection, REFLEX™
has designed and developed
the REFLEX™
RB95 blackout roller
blind and guide system
with a great degree
of versatility to
adapt to the many
and varied applications
such as AV quality
light control, bedroom
darkening and conference
facilities.
As with most REFLEX™
products, the REFLEX™
RB95 cassette allows
the joining of several
blinds to the one
motor, both in straight
lines or through angles
up to 45 degrees from
straight, thus decreasing
the perceived costs
associated with motorisation.
The system would normally
incorporate a selection
from the range of
blackout fabrics available
but can also be installed
with screen or sheer
fabrics and no side
guides to deliver
a very uncluttered,
clean looking alternative
to the standard roller
blind.
|
|
 |
| |
The
REFLEX™ RB95
is ideally suited
to internal installation
as either “face”
fix (onto vertical
walls/window frames)
or “top”
fix (to the ceiling/window
head within reveal)
with consideration
given to the “sealability”
of the head box and
side guides to the
substructure. The
mounting of the head
box is simply accomplished
by drilling and screwing
through the casing
at the required position,
followed by the assembly
of the blind within
the cassette and the
split side guides
can be either “face”
fixed or “side”
fixed as required
with either screws
or high tenacity double
sided adhesive tape.
Where multiple blinds
are required to cover
a continuous area,
the greatest cost
benefits can be achieved
by joining a single
drive motor to the
rest of the blinds
through the incorporation
of drive shafts which
can be flexible or
solid and are hidden
within the cassettes.
Adjoining blinds can
meet at up to 45 degrees
from straight.
|
|
|
 |
| |
The
head box shall be
a pair of 6061 aluminium
alloy extrusions and
is comprised of 1)
a main mounting rail
which has various
roller blind fixing
facilities and positioning
for the substrate
fixings, 2) the detachable
fascia which shall
snap onto the main
rail to completely
cover the system,
3) the end plates
which shall be glass
reinforced, UV stabilised
nylon with facilities
to receive several
different configurations
of roller blind attachment.
The side guides shall
be a split pair of
6061 aluminium alloy
extrusions comprised
of 1) a main mounting
rail with facilities
for side and face
fixing as well as
the retention slot
for the Schlegel light/dust
seal 2) the detachable
fascia which also
has a slot for the
Schlegel light/dust
seal 3) side guide
end cap for a neat
finish to the lower
end of the side guide.
The installation may
consist of a combination
of the following;
S (single or individual),
M (motor), I (intermediate)
and T (tail) blinds
in various combinations
and can contain 40
or 60 mm motorised
roller systems. The
roller shall be 6106
aluminium alloy and
have a natural anodised
finish. The motor
shall be positioned
within either the
single (S) roller
or motor (M) roller
(when multiple rollers
are installed) and
be adjoined to the
intermediate (I) or
tail (T) roller with
a straight or flexible
drive shaft. Where
two blinds meet at
an angle, only the
fascias shall be mitered
at the intersection
to enhance the “clean”
lines. Upper and lower
travel limit positioning
shall be externally
adjustable.
Electrical connection
shall be via a MOLEX
inline connector.
Fabric shall be as
selected (see separate
specifications).
These products
are available as components
to licensed fabricators.
Please contact us
for more information.
|
|
|
 |
 |
|
|
| |
|
|
|
|
|
