 |
|
 |
|
|
|
 |
 |
| |
To
answer the growing
demand for an affordable
motorised tracking
system for commercial
and domestic curtains,
REFLEX™ SHADING
SYSTEMS has developed
the RCM 35 and RCM
50 240 volt motors
and track components
to offer the very
best solution to this
demand.
The versatility of
this system is almost
limitless in applications
from small domestic
lightweight sheer
curtains to theatre
and stage curtain
systems.
The track can be formed
to tight radii and
curvable to suit almost
any configuration.
For very large applications
dual motors can be
utilised giving up
to 100 watts of pulling
power to open and
close the largest
of curtains. The system
incorporates the simplest
of installation techniques
and the motors are
extremely reliable.
The travel of curtains
along the track is
limited by a pair
of micro switches
within the REFLEX™
motors, with infinite
adjustability with
the simplest of equipment.
The REFLEX™
RCM CURTAIN TRACK
SYSTEM is the simplest
and most affordable
tracking system available.
Combined with the
vast range of REFLEX™
control systems from
simple wall switches
to remote controls
and computer interfacing,
The REFLEX™
RCM SYSTEM is the
answer to your curtain
control demands.
|
|
 |
| |
The
application will determine
the configuration
of the motor(s) and
direction of draw
of the curtain. The
draw configuration
can be from right
to left, left to right
, draw to the centre
or from the centre
to the ends. Drawing
of more than one curtain
in the same direction
can be achieved as
well. For heavy applications
such as long drop
curtains with curved
tracks, the addition
of a second or slave
motor will double
the power to give
smooth trouble free
motion.
The arrangement of
carriers and lead
plate cater for most
types of curtain tapes
and headings and due
to the very narrow
profile of the track
the curtain can be
fitted below or in
front of the track
(below is recommended).
Attach points are
supplied for the fixed
ends of the curtain
where necessary.
|
|
|
 |
| |
The
track system is comprised
of extruded aluminium
alloy track 32 mm
wide and 26mm high.
The fixing “cam
clamps” are
designed to twist
and lock into a groove
in the top face of
the track and can
be positioned anywhere
along the length.
These cam clamps are
fixed to the substrate
in the desired position
with 10 g screws Within
the track, the nylon
roller carriers are
captured in grooves
for positive alignment
whilst traveling.
The lead or driven
carrier plate is fixed
to the nylon drive
belt and are positively
positioned due to
the holes formed to
engage the drive sprocket.
The curtain shall
be suspended on the
roller carriers spaced
at approximately 80
mm when fully drawn
with the first two
hooks fixed on the
lead carrier plate
for positive positioning.
The motor is a vertical
axis, AC, asynchronous,
squirrel cage, 240
volt motor producing
either 35 (RCM35)
or 50 (RCM50) watts
respectively. Incorporated
in the motor is a
heavy duty,final drive,
planetary reduction
gearbox. Easy “bayonet”
motor fitting allows
removal of the motor
for servicing. The
curtain travel is
limited in both directions
by the adjustable
limit switches positioned
under the cover at
the lower end of the
motor. The motors
are supplied with
a 2 meter, four core
lead with quickly
detachable connector
in the motor for ease
of service.
These products
are available as components
to licensed fabricators.
Please contact us
for more information.
|
|
|
 |
 |
|
|
| |
|
|
|
|
|
